Follow these instructions to set up your C Series Swivl Robot with an iOS or Android mobile device:

 

  • Press and hold the Power button on the Swivl base until LEDs light-up.
  • Use the included Lightning cable to connect the base to your iOS device. If you are using Android, you must use a Swivl Android cable (sold separately).
  • Launch the Swivl app on your mobile device.
  • Remove the Primary Marker from the charging dock in the Swivl base.
  • Press and hold Power button on the side of the marker until the LED lights up. [This will be the primary marker for the system.]


Your C Series Swivl is now connected to your mobile device and will respond to track the movement of the Primary Marker. If you want to make sure the robot is fully connected to the mobile device, you can check the setup status in a couple of ways.